聲學原理與噪音量測控制（第三版）

第1章　基礎聲學
1.1　波與聲波(Wave and Sound Wave)
1.2　聲音基本參數(Basic Parameter of Sound)
1.3　聲波的傳遞方式(Propagation of Sound Wave)
1.4　影響空氣中聲波傳遞的因素(Influence Factor of Sound Wave in Air)
1.5　聲音大小的表示法(Representation of Sound Level)
1.6　頻率與八度音(Frequency and Octave)
1.7　聲速與粒子速度(Sound Speed and Particle Velocity)
1.8　音源(Sound Source)
1.9　音場特性(Characteristic of Sound Field)
1.10　指向性(Directivity)
1.11　聲波的波動方程式(Wave Equation of Sound Wave)
1.12　結構噪音(Structure-borne Noise)
1.13　其他聲音特性(Other Acoustic Characteristic)
1.14　問題(Question)
第2章　聲音感知之生理構造
2.1　耳朵與聽覺(Ear and Hearing)
2.2　聽覺範圍(Auditory Field)
2.3　等響度曲線圖(Equal Loudness Contour)
2.4　聽覺障礙(Hearing Impairment)
2.5　聽覺損失指標(Hearing Loss Index)
2.6　實驗(Experiment)
2.7　問題(Question)
第3章　量測設備與特殊測試環境
3.1　麥克風(Microphone)
3.2　電容式麥克風特性 (Characteristics of Condenser
Microphone)
3.3　前置放大器(Preamplifier)
3.4　噪音計(Sound Level Meter)
3.5　噪音劑量計(Dose Meter)
3.6　校正器(Calibrator)
3.7　參考音源(Reference Sound Source)
3.8　類比數位處理過程(Analogue and Digital Signal Processing)
3.9　頻譜分析儀(Spectrum Analyzer)
3.10　無響室(Anechoic Chamber)
3.11　迴響室(Reverberation Chamber)
3.12　實驗(Experiment)
3.13　問題(Question)
第4章　頻率分析
4.1　時域訊號(Time Domain Signal)
4.2　傅立葉轉換(Fourier Transform)
4.3　數位濾波器(Digital Filter)
4.4　FFT頻率分析特性(FFT Analysis Characteristic)
4.5　實驗(Experiment)
4.6　問題(Question)
第5章　聲壓量測
5.1　參數(Parameter)
5.2　聲壓量測過程與影響(Procedure and Influence in Sound Measurement)
5.3　聲壓量測依噪音源分類(Sound Pressure Measurement Classed by Sound Source)
5.4　聲壓量測標準(Sound Pressure Measurement Standard)
5.5　標準—ISO 11201(Standard—ISO 11201)
5.6　標準—ISO 11202(Standard—ISO 11202)
5.7　噪音分析(Noise Analysis)
5.8　實驗(Experiment)
5.9　問題(Question)
第6章　環境噪音量測與法規
6.1　國內噪音作業問題探討
6.2　環境噪音來源(The Source of Environmental Noise)
6.3　環境噪音指標與量測(Environmental Noise Index
and Measurement)
6.4　室室內噪室內噪音指標與量測(Indoor Noise Index
and Measurement)
6.5　交通噪音指標與量測(Traffic Noise Index and
Measurement)
6.6　航空噪音指標與量測(Aircraft Noise Index and
Measurement)
6.7　噪音暴露(Noise Explosure)
6.8　噪音管制標準
6.9　噪音管制法施行細則
6.10　環境音量標準
6.11　機動車輛噪音管制辦法與標準
6.12　民用航空器噪音管制標準
6.13　實驗(Experiment)
6.14　問題(Question)
第7章　聲強量測
7.1　聲強(Sound Intensity)
7.2　聲強量測設備(Sound Intensity Measurement Equipment)
7.3　聲強量測限制(Limitation of SI Measurements)
7.4　噪音源定位(Noise Source Identification)
7.5　問題(Question)
第8章　聲功率量測
8.1　聲功率原理(The Principle of Sound Power)
8.2　聲功率量測方法與標準(The Method and Standard of Sound Power Measurement)
8.3　聲功率量測—自由音場法(Sound Power Measurement—Free-field Method)
8.4　標準—ISO 3744 (Standard—ISO 3744)
8.5　聲功率量測—迴響音場法(Sound Power Measurement—Reverberation -field Method)
8.6　聲功率量測—聲強法(Sound Power Measurement—Sound Intensity Method)
8.7　標準—ISO 9614-1 (Standard—ISO 9614-1)
8.8　測試法規—ISO 7779(Test Code—ISO 7779)
8.9　實驗(Experiment)
8.10　問題(Question)
第9章　建築聲學量測
9.1　迴響與迴響時間(Reverberation and Reverberation Time)
9.2　室內迴響時間量測—ISO 3382(Measurement of The
Reverberation Time of Rooms)
9.3　吸音係數量測(Sound Absorption Coefficient Measurement)
9.4　迴響室法吸音係數量測—CNS 9056(Method for Measurement of Sound Absorption Coefficients in a Reverberation Room)
9.5　聲音穿透損失量測—CNS 8466(Sound Transmission Loss Measurement)
9.6　實驗(Experiment)
9.7　問題(Question)
第10章　噪音控制原理與實務
10.1　國內噪音噪音控制計劃與步驟(The Steps in a Noise
Control Program)
10.2　國內噪音噪音源改善(Improvement Noise Source)
10.3　國內噪音傳遞路徑改善(Improvement Noise Transmission
Path)
10.4　噪音控制實例(Noise Control Practical Examples)
10.5　主動式噪音控制簡介(Active Noise Control)
附錄A　與聲音量測相關的ISO標準列表
附錄B　波動方程式解
B.1　起始與邊界條件(Initial and Boundary Conditions)
B.2　波動方程式解(The solution of Wave Equation)
B.3　兩端固定、不受外力的弦(Both End Fixed String Without Force)
附錄C　建築材料吸音係數

第1章　基礎聲學
1.1　波與聲波(Wave and Sound Wave)
1.2　聲音基本參數(Basic Parameter of Sound)
1.3　聲波的傳遞方式(Propagation of Sound Wave)
1.4　影響空氣中聲波傳遞的因素(Influence Factor of Sound Wave in Air)
1.5　聲音大小的表示法(Representation of Sound Level)
1.6　頻率與八度音(Frequency and Octave)
1.7　聲速與粒子速度(Sound Speed and Particle Velocity)
1.8　音源(Sound Source)
1.9　音場特性(Characteristic of Sound Field)
1.10　指向性(Directivity)
1.11　聲波的波動方程式(Wave Equatio...